miamitama.blogg.se - Windows nt4 server iso

Windows nt4 server iso how to#
Windows nt4 server iso install#
Windows nt4 server iso iso#
Windows nt4 server iso download#
Windows nt4 server iso mac#

When computer M finishes the network boot, if you do not enter image and device name when running "dcs" -> clonezilla-start -> clonezilla-save-disk, a prompt will ask you to name the image and choose the device.

Turn on computer M, set it as network boot (PXE or etherboot) in the BIOS or by pressing the hotkey (refer to your motherboard manual) when it is booting.

Next, choose"clonezilla-save-disk" (use space key to mark it)

run "dcs", then choose "clonezilla-start" (use the space key to mark it).

Set the Clonezilla server to be clonezilla-save-disk mode: In the Clonezilla server,.

Windows nt4 server iso how to#

The following is an example of how to save an image from a single computer (called computer M) and then restore it to 39 computers in a 40-computer classroom:.Once the mode in DRBL server is ready, you can boot your clients via PXE to save or restore the image.Īs root, run "dcs", then choose "Clonezilla-stop". This is what the graphic mode looks like:Īgain, check the mode you want by "space" key, then follow the menus to do it.clonezilla-restore-parts: clonezilla restore partitions mode.clonezilla-save-parts: clonezilla save partitions mode.clonezilla-restore-disk: clonezilla restore disk mode.clonezilla-save-disk: clonezilla save disk mode.You will see two menus: clonezilla-start and clonezilla-stop like this:Ĭheck clonezilla-start by "space" key, various modes will be shown:

As root, run "dcs" in DRBL server to switch clients' mode.In this case, you can even use the "impatient method" to setup the DRBL environment. However, if you are 100% certain that no other computer will be involved in the DRBL environment, and you do not care about the different IP address leasing problem, you can use the range in nf. Therefore even it's the same client, when it boots GNU/Linux via DRBL, it will leases one IP address, then next time when it boots into local MS windows, it will lease another different IP address. Besides, if you do not provide the static IP address to client, different operating systems (like GNU/Linux and MS windows), they use different DHCP client ID. This will keep you from cloning the system to incorrect or unknown clients. If you prefer to use DRBL live, remember to isolate the network environment from others.

Windows nt4 server iso mac#

When setting up the DRBL server, it is recommended to collect the MAC addresses of the client computers and let the DRBL server offer the same IP address for the clients every time it boots. For how to use the latter mode, you can refer to here. During the configuration, you can choose to use the OS on the server as client's working environment when doing Clonezilla imaging/cloning job, or to use Clonezilla live as the OS of client in Clonezilla SE. Once DRBL is installed on the server, Clonezilla is ready. The setup might take about 30 minutes to a few hours, it depends on your internet bandwidth.

Windows nt4 server iso install#

To install and configure a DRBL server, check this installation doc then follow it to setup such a Clonezilla server. The 2nd method is to install and configure DRBL on GNU/Linux system.After it enters X-window, you can click "Clonezilla SE" icon to do the runtime configuration. Once the boot media is ready, you can boot it on the machine you want to run as DRBL server. To put DRBL live on a USB flash drive or USB hard drive, check this doc. The CD can then be used to boot the machine you want to image or clone.

Windows nt4 server iso iso#

Then you can burn the iso file to a CD/DVD with any burnning program, such K3b on GNU/Linux or InfraRecorder on MS Windows, and remeber to choose "Burn Image" to burn the ISO file on the CD. The former one is for CD, the latter is for USB flash drive.ĭownload an ISO file for CD/DVD. Two types of files are available, iso and zip.

Windows nt4 server iso download#

To put DRBL live on boot media (CD or USB flash drive), the basic steps are to download pre-build DRBL Live then put it in a boot media (CD, USB flash drive or USB hard drive).

Use DRBL Live without installation it on a server.

Clonezilla Server Edition How to setup a Clonezilla server ?Ī DRBL server must first be prepared in order to use Clonezilla to do massively cloning.

For more info, please refer to this step-by-step docs. What you need is to boot a machine with Clonezilla live and run it as the Clonezilla lite server, then you can use it for massive deployment. Clonezilla Server Two kinds of Clonezilla server are available, one is Clonezilla lite server, and the other is Clonezilla server edition.įrom Clonezilla live >= 2.5.2-17, there is a lite server mode which you can use to deploy the clients.